LawRenceAr190
Jet Boat Lover
- Messages
- 17
- Reaction score
- 5
- Points
- 72
- Boat Make
- Yamaha
- Year
- 2021
- Boat Model
- AR
- Boat Length
- 19
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
-
Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.
Click Here for more information>Ride Steady group buy for JetBoaters.net members only
You can dismiss this Notice by clicking the "X" in the upper right>>>>>
Helix 7 mega side imaging
- Thread starter LawRenceAr190
- Start date
tdonoughue
Jetboaters Admiral
- Messages
- 5,029
- Reaction score
- 4,157
- Points
- 437
- Location
- The Woodlands, TX 77381
- Boat Make
- Yamaha
- Year
- 2012
- Boat Model
- AR
- Boat Length
- 24
Might be able to mount it directly to that plate at the forward side of the rudder. Looks like there is a little gap there into which you can run the wire... then you can either bolt or epoxy the transducer to that plate? That will put you forward of the rudder so you can see both sides.
That's my idea...
That's my idea...
Similar threads
