Help Running Transducer Cable

[nvuocolo]

Hello everybody hope all is well.

I am installing a 3-in-1 transducer on my 23 AR 250 using a Stern Saver. As I saw on Captain Leonard's Your Tube Video, I am going to run the wire through the bottom of the swim deck and seal it with a cable clamp.

What is the best way to run the cable from the mechanical access port to the cockpit? I have already run the cable for the HDS 9 Live I installed last year and ran the cable down the Starbird side into the engine compartment and to the battery. I have had no issues whatsoever with that. I planned to run the Transducer cable to the fish finder the same way. I just don't know the best way to run it from the mechanical access into the boat, and I still have the boat winterized, so I can't get to it at the moment. Any help would be greatly appreciated! Thanks.

 

[tdonoughue]

Don't know that I ran that cable yet, nor on that year, but on mine there is a bundle of wires up above the seats in the gunnel area. I followed the bundle out of the engine compartment on the starboard wires or the port battery cables to find the best way on mine.