• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Help with reverse adjustment/neutral creep

Enduro900

Jet Boat Addict
Messages
468
Reaction score
314
Points
107
Location
SE Michigan
Boat Make
SeaDoo
Year
2012
Boat Model
Challenger
Boat Length
21
Hey just got a new to me 2012 Challenger 210SE/twin 430hp.

LOVE the boat (only went out for about 30 mins today as it started to rain).

question:I thought I read or saw in a video there is a way to adjust “neutral’ so that the boat won’t move?

cannot seem to figure it out…..since the chap/vortex use the same engines/same itc system i was hoping someone could help
 

Shawn Weatherly

Jet Boat Lover
Messages
23
Reaction score
5
Points
82
Boat Make
Chaparral
Year
2017
Boat Model
VRX
Boat Length
24
Hey just got a new to me 2012 Challenger 210SE/twin 430hp.

LOVE the boat (only went out for about 30 mins today as it started to rain).

question:I thought I read or saw in a video there is a way to adjust “neutral’ so that the boat won’t move?

cannot seem to figure it out…..since the chap/vortex use the same engines/same itc system i was hoping someone could help
ok, so your throttle cable controls the reverse gate. On the reverse gate, there should be a barrel nut at where the cable meets the transom. If you are going forward at idle then the gate is to high. If it is going reverse at idle, then the gate is to low. This video shows the cable perfectly at 1:23 Mark
 
Last edited:
Top