• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Issues with touch screen command center delamination?

MTC Screens

Active Member
Messages
13
Reaction score
20
Points
42
Boat Make
Moomba
Year
2011
Boat Model
Limited
Boat Length
21
Hi everyone, i am just curious if the Scarab boats have problems with delamination and touch response issues like on other boats? If so- what years, and models are affected? Here is a photo. 20221115_122227.jpg
 
Some do, some dont. Depends on how well you keep it covered.
 
mine did that twice on my 2020 255 open... replaced under warranty both times. now I keep it covered more often
 
Back
Top