• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Mooring Cover Dust

Edward

Jet Boat Addict
Messages
139
Reaction score
68
Points
117
Location
Dallas, TX
Boat Make
Yamaha
Year
2015
Boat Model
AR
Boat Length
24
I have the grey cover, and have noticed the last 2 times I've taken off the cover to prep for taking the boat out, the boat is covered with this fine dust. The dust appears to be coming from the cover as I can shake it up and get a bunch flying around.

Anyone else experiencing this?

I guess I'll wash and/or vacuum the cover. Probably need to treat it with some water resistant protection as well.
 

Bill D

Jetboaters Admiral
Messages
1,790
Reaction score
2,151
Points
302
Location
Prairieville, LA
Boat Make
Yamaha
Year
2011
Boat Model
Limited S
Boat Length
24
I had the same thing happening last year. Laid the cover out of the ground and scrubbed it with a deck brush on both sides. Stopped the dust. Then I applied the 303 fabric guard to seal everything up. No leaks and no dust. :D
 

txav8r

Jetboaters Admiral
Staff member
Administrator
Messages
6,590
Reaction score
3,275
Points
422
Location
Lake Ray Roberts, Texas
Boat Make
Boatless
Year
NA
Boat Model
Other
Boat Length
NA
Its pretty common as the surlast fabric starts to fade and age, that it also starts to powder. Do you store your boat covered outside?
 

buckbuck

Jetboaters Admiral
Messages
3,832
Reaction score
5,296
Points
422
Location
Texas
Boat Make
Yamaha
Year
2008
Boat Model
X
Boat Length
21
Uh-oh. I suspect the death of a cover soon.
 

Wayloncle

Jetboaters Admiral
Messages
1,822
Reaction score
1,839
Points
277
Location
73703 Enid, OK
Boat Make
Yamaha
Year
2009
Boat Model
AR
Boat Length
23
That's what mine was doing, I laid it out scrubbed it and washed it on both sides. Week later I took it off and more dust. I replaced it after that, it was getting brittle and I might as well had put a screen door over the boat the way it leaked.
 

Edward

Jet Boat Addict
Messages
139
Reaction score
68
Points
117
Location
Dallas, TX
Boat Make
Yamaha
Year
2015
Boat Model
AR
Boat Length
24
Its pretty common as the surlast fabric starts to fade and age, that it also starts to powder. Do you store your boat covered outside?
I do store outside, in the Texas heat with no shade.

I will wash the cover and treat again. I've only had the cover for 1 year so hoping I can extend it to at least 2 more years.
 

msavold

Jetboaters Captain
Messages
764
Reaction score
1,388
Points
237
Location
Columbia, MD
Boat Make
Yamaha
Year
2012
Boat Model
SX
Boat Length
24
@Edward, glad you asked - noticed the same thing with our (black) cover this year. Going to try the wash/scrub/303 and, sigh, budget for a new one...
 
Top