• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • ISLAND JAY has your Jetboaters.net Clothing, hats, stickers and more all at a 30% discount until June. Click Here for more information>SWAG for JetBoaters.net members only

    Help out a new business and show off your love of Jetboating!

    You can dismiss this notice by clicking the "X" in the upper right>>>>

Need Advice for Removing Lanyard Killswitch on 2008 232 Limited

Gonzo890

Member
Messages
2
Reaction score
0
Points
10
Boat Make
Yamaha
Year
2008
Boat Model
Limited
Boat Length
23
Starboard engine is cranking but not turning over. I believe the problem is the lanyard engine killswitch (after swapping spark plugs). I’m having trouble removing the switch. Went to remove the throttle to access it but 2 of the screws holding the throttle in place are completely stripped out. Is there any other way to replace the Lanyard Killswitch without removing entire panel?
 
You should be able to get to it from the fire extinguisher hole.
 
Back
Top