• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Need some Advice on damage from the Dock

Jim Davis

Jet Boat Addict
Messages
74
Reaction score
32
Points
107
Location
DFW
Boat Make
Yamaha
Year
2021
Boat Model
255XE
Boat Length
25
Well I have my first dock bump damage. Bumper was not in the right spot and I bumped the dock a little hard. What should I do with it until maybe the end of season to get it fixed correctly. Put a little epoxy in it to hold it closed? Open to ideas but my skills are limited "as in I don't have any" when it comes to fiber glass and gel coat.
Thanks in advance.
 

Attachments

  • IMG_20210623_083755[5031].jpg
    IMG_20210623_083755[5031].jpg
    156 KB · Views: 66
  • IMG_20210623_083753[5032].jpg
    IMG_20210623_083753[5032].jpg
    127.5 KB · Views: 66
I picked up a similar ding on my first time out (wind gust blew boat into dock corner - ugh), and a few weeks later had it fixed at the dealer when the boat was in for its 10 hr service. Cost a few hundred and fix was perfect.

It looked just like yours. If there had been a delay, I might have put a piece of tape over it.
 
Best advise a fiberglass boat builder ever gave me on dings is "just put packing tape over it until you can get it fixed. That'll keep the water out, but we'll still be able to repair it without grinding."
 
Back
Top