Tlaux
Jet Boat Addict
- Messages
- 41
- Reaction score
- 47
- Points
- 97
- Location
- Lake of the Ozarks Missouri
- Boat Make
- Yamaha
- Year
- 2012
- Boat Model
- X
- Boat Length
- 21
What size nut goes on the cleat in a 212x. Mine has fallen off and can’t find it. Thanks
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Nut size on cleat
- Thread starter Tlaux
- Start date
- Tagged users None
- Messages
- 5,807
- Reaction score
- 6,396
- Points
- 482
- Location
- Corinth, TX (DFW)
- Boat Make
- Yamaha
- Year
- 2007
- Boat Model
- AR
- Boat Length
- 23
not sure about your year boat but check out this thread, it's 1 1/4"
https://jetboaters.net/threads/lost-your-nuts-cleat-nuts-fall-off-how-to-get-them-if-you-can-reach-them.21/
you could also check maybe your front cleats if you can see them thru the anchor locker to confirm, if they are mid or back get ready to recruit a neighborhood kid to help,
https://jetboaters.net/threads/lost-your-nuts-cleat-nuts-fall-off-how-to-get-them-if-you-can-reach-them.21/
you could also check maybe your front cleats if you can see them thru the anchor locker to confirm, if they are mid or back get ready to recruit a neighborhood kid to help,
Zonie
Jet Boat Junkie
- Messages
- 220
- Reaction score
- 174
- Points
- 127
- Location
- Rotterdam Junction, NY
- Boat Make
- Yamaha
- Year
- 2005
- Boat Model
- SX
- Boat Length
- 23
I lost one on a rear cleat. It's somewhere in the hull but I can't see or reach it. A previous thread sent me to McMaster-Carr for a replacement with a Nylon insert so it CAN'T fall off again. I bought a few and replaced the others as well. BTW, this site has lots of cool stuff. I've purchased everything from fasteners to weatherstrips, even those tiny little plastic bushings on the steering linkages at the pumps. Great service, fast and relatively inexpensive.
18-8 Stainless Steel Nylon-Insert Locknut
7/8"-9 Thread Size
91831A037
https://www.mcmaster.com/mv1502131667/# ... 7/=18vpj6s
Washer:
18-8 Stainless Steel Mil. Spec. Washer
Passivated, 7/8" Screw Size, NAS 1149-C1490R
98017A225
https://www.mcmaster.com/mv1502131667/# ... /98017A225
18-8 Stainless Steel Nylon-Insert Locknut
7/8"-9 Thread Size
91831A037
https://www.mcmaster.com/mv1502131667/# ... 7/=18vpj6s
Washer:
18-8 Stainless Steel Mil. Spec. Washer
Passivated, 7/8" Screw Size, NAS 1149-C1490R
98017A225
https://www.mcmaster.com/mv1502131667/# ... /98017A225
Tlaux
Jet Boat Addict
- Messages
- 41
- Reaction score
- 47
- Points
- 97
- Location
- Lake of the Ozarks Missouri
- Boat Make
- Yamaha
- Year
- 2012
- Boat Model
- X
- Boat Length
- 21
3/4 inch nut did the trick with a little loctite.
Thanks
Thanks