• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Nutz

latitudeadjuster

Jetboaters Captain
Messages
817
Reaction score
690
Points
222
Location
Mineral, Virginia
Boat Make
Yamaha
Year
2014
Boat Model
X
Boat Length
21
Anyone know the specific size nut for the handrails? My boat is '14 212X but Im sure there are all the same?

90170-15S00-00 is the part number but Im not wanting to pay $8 for a nut from the dealer and rather from hardware store....lol

Just figured someone had to size one up sometime.

Thanks!
 
Anyone know the specific size nut for the handrails? My boat is '14 212X but Im sure there are all the same?

90170-15S00-00 is the part number but Im not wanting to pay $8 for a nut from the dealer and rather from hardware store....lol

Just figured someone had to size one up sometime.

Thanks!
I'm pretty sure they are 1/4"-20
 
I don't recall personally, but when I installed my extra ones, I was able to find the nuts in my garage... So they are a common size, and I would not doubt the size previously suggested.

Just wanted to add: if you are on salt water, particularly, you may want to ensure you have stainless. Still, I don't think that gets you to $8 a pop, but...
 
I thought this was going to be a Memorial Day reference to the Battle of the Bulge.
 
Back
Top