• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

OEM ballast bag repair

JetDrew1332

Member
Messages
3
Reaction score
2
Points
12
Boat Make
Yamaha
Year
2014
Boat Model
212X
Boat Length
21
Looking for advice on a ballast bag repair. Just purchased a 2014 212X and removed the bags for winterizing and inspection and found a patch on one but doesn't appear to be holding well anymore. Not sure if it's PVC material. Any advice would be greatly appreciated!
 
You'd be better off replacing it. Wakemakers likely has a replacement or close to a replacement for that. I've not seen patches and things last very long or work very well on ballast bags. Those tend to be temp fixes to get you through a short period of time until a new one can be bought.
 
You'd be better off replacing it. Wakemakers likely has a replacement or close to a replacement for that. I've not seen patches and things last very long or work very well on ballast bags. Those tend to be temp fixes to get you through a short period of time until a new one can be bought.
OK, thanks for the advice!
 
I had a mouse eat through my swimdeck ballast bag. I was considering taking it to a tire shop for one of their vulcanized patches. They are just too darn expensive not to try.
 
I had a mouse eat through my swimdeck ballast bag. I was considering taking it to a tire shop for one of their vulcanized patches. They are just too darn expensive not to try.
I took the advice given by suke and ordered a new OEM ballast bag from Partzilla. Considering how it is tucked away deep under the seat, i didnt want to risk a leak. Although the patch that is currently on there didnt leak when i filled it during this last season. It was only $178 with tax and shipping, which isn't to bad. I am going to keep the old one and try a new patch but keep it as an extra to place either on the deck or in the ski locker for extra weight. Also going to buy a sumo pump (or equivalent) to fill/drain it. I had planned on buying extra ballast bags and a pump for next season anyway. So if it works, great! If not, still worth a try. I found a bunch of pvc patch kits online. Now just gotta decide on one will work the best for this application.
 
Back
Top