Oil Filter Model - 192 Series

[Joe Hellaby]

Hi, I just got a new 2016 SX192, and I'm planning on doing the break-in oil change sometime soon. I'm having trouble finding much information for the oil change online, I'm always referred to the service manual (that I don't want to waste the money on).

What is the model number for the Yamaha recommended oil filter?

Do you just use the Yamalube 10W-40 oil?

Where is the cheapest place to buy? Online (link)?

Thanks!

 

[BakedZiti]

I just bought the yamaha oil change kit, comes with everything you need!!

 

[njmr2fan]

2014 Ar190 and I use K&N filter Part number HP-1002 and Shell Rotella T6. Your 2016 should use the same filter, I dont think the filter changed.

 

[Joe Hellaby]

What model of NGK's do you use?

 

[ruztew]

Order the oil change kit from @JetBoatPilot

 

[Bill D]

@Joe Hellaby I'm not 100% sure if there is anything different for the supercharged engines, but the NGK's for the 1.8L Yamaha's are LFR6A. Below is a link to them on Amazon, although you may find them cheaper somewhere else.

http://www.amazon.com/NGK-LFR6A-Sta...11005&sr=8-1-fkmr0&keywords=NGK+LFR6a+iridium

 

[ruztew]

I got my plugs from sixityauto I believe, cheaper than anywhere else I could find them. Showed up a few days after the order was placed.

 

[Shannon]

Got my plugs at rockauto.com and used k&n 1002 because of how easy they are to get on and off with socket. I have always used European Castrol Synthetic 0w40 in Bmw and Audi. So I just did 1st oil change using the Castrol in my 16 Ar 192.. Love the German oil..My 06 4runner has had the oil all ten years I have owned it. Runs perfect! Best of luck!

 

[Britboater]

I didn't change my plugs at the ten hour service, not sure if the S/C are different but check. A simple strap oil filter wrench and puppy pads underneath to catch the spillage works a treat. Don't forget the int bearing, just over an oz of grease needed.