- Messages
- 3,223
- Reaction score
- 2,516
- Points
- 372
- Location
- Acworth, G.A.
- Boat Make
- Yamaha
- Year
- 2014
- Boat Model
- AR
- Boat Length
- 24
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
OK, who's going to be first?
- Thread starter 0627Devildog
- Start date
- Tagged users None
itsdgm
Jetboaters Admiral
- Messages
- 3,637
- Reaction score
- 3,089
- Points
- 417
- Location
- Rancho Santa Margarita, California
- Boat Make
- Yamaha
- Year
- 2007
- Boat Model
- AR
- Boat Length
- 21
That looks awesome. A bit out of my price range though 
- Messages
- 3,223
- Reaction score
- 2,516
- Points
- 372
- Location
- Acworth, G.A.
- Boat Make
- Yamaha
- Year
- 2014
- Boat Model
- AR
- Boat Length
- 24
Hence why I asked who will be first, instead of posting pics of my install. . . . . ; )That looks awesome. A bit out of my price range though
itsdgm
Jetboaters Admiral
- Messages
- 3,637
- Reaction score
- 3,089
- Points
- 417
- Location
- Rancho Santa Margarita, California
- Boat Make
- Yamaha
- Year
- 2007
- Boat Model
- AR
- Boat Length
- 21
I'll go first. My boat, your money?
bobbie
Jetboaters Admiral
- Messages
- 1,055
- Reaction score
- 1,570
- Points
- 267
- Location
- Georgetown, TX
- Boat Make
- Yamaha
- Year
- 2014
- Boat Model
- X
- Boat Length
- 21
Maybe since wakemakers is in Oregon they will give me a local discount!? I'm sure they will need to test it on a jet boat.
Big Shasta
Jetboaters Captain
- Messages
- 1,884
- Reaction score
- 1,529
- Points
- 227
- Location
- Panama City Beach, FL
- Boat Make
- Boatless
- Year
- NA
- Boat Model
- Other
- Boat Length
- NA
YIKES....should include the ballast system (and a handie) for that price.
Ronnie
Jetboaters Fleet Admiral
- Messages
- 8,552
- Reaction score
- 11,435
- Points
- 647
- Location
- SF Bay Area
- Boat Make
- Yamaha
- Year
- 2010
- Boat Model
- Limited S
- Boat Length
- 24
$4k plus tax (close to 10%) and shipping to CA! Thank God my family and I are not seriously into wake sports. it's all relative most of the dedicated wake boats I've seen are 20 feet long and weight more as a well as cost more than a 24 foot Yamaha jet boat.
CFD3Captain
Jetboaters Lieutenant
- Messages
- 389
- Reaction score
- 315
- Points
- 157
- Location
- Coshocton, Ohio
- Boat Make
- Moomba
- Year
- 2014
- Boat Model
- Wake
- Boat Length
- 21
Not to keep beating a dead horse, but still doesn't solve the jet wash issue.
- Messages
- 3,223
- Reaction score
- 2,516
- Points
- 372
- Location
- Acworth, G.A.
- Boat Make
- Yamaha
- Year
- 2014
- Boat Model
- AR
- Boat Length
- 24
Obviously this would be in addition to dual wake wedges. . . . .
dansshin
Jet Boat Addict
- Messages
- 386
- Reaction score
- 156
- Points
- 112
- Location
- Brooklyn Park, MN
- Boat Make
- Yamaha
- Year
- 2013
- Boat Model
- X
- Boat Length
- 21
What's jet wash issue?
- Messages
- 13,331
- Reaction score
- 13,426
- Points
- 857
- Location
- Royal, AR
- Boat Make
- Yamaha
- Year
- 2007
- Boat Model
- SX
- Boat Length
- 23
$4K for trim tabs is rediculous!
When I first put trim tabs on my boat a friend who is really into surfing and had an AR210 at the time ballasted my boat and we tried the tabs out for surfing. At the low surfing speeds the tabs did not create enough force to significantly change the wake. I think they would do more with a differently shaped hull where the tabs would be further in the water.
When I first put trim tabs on my boat a friend who is really into surfing and had an AR210 at the time ballasted my boat and we tried the tabs out for surfing. At the low surfing speeds the tabs did not create enough force to significantly change the wake. I think they would do more with a differently shaped hull where the tabs would be further in the water.
CFD3Captain
Jetboaters Lieutenant
- Messages
- 389
- Reaction score
- 315
- Points
- 157
- Location
- Coshocton, Ohio
- Boat Make
- Moomba
- Year
- 2014
- Boat Model
- Wake
- Boat Length
- 21
it's the thrust from the nozzle's. It doesn't allow the wake/wave to form. It's why the wake wedge was created. It diverts the jet thrust away from the wake to help clean it up.