• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Port Side LED Cup Holders not working

Tidbits

Well-Known Member
Messages
10
Reaction score
2
Points
52
Boat Make
Yamaha
Year
2012
Boat Model
242 Limited S E-Series
Boat Length
24
Was wondering if anyone could help me with this issue. Every Cup Holder on the port side does not work. I've only had this boat for 4 months so thinking it was the cup holders themselves I purchased replacements. Tried replacing this afternoon and alas they still don't work. Has anyone else had this problem and if so how did you resolve the problem. Thanks!!
 

tdonoughue

Jetboaters Admiral
Messages
4,891
Reaction score
4,023
Points
417
Location
The Woodlands, TX 77381
Boat Make
Yamaha
Year
2012
Boat Model
AR
Boat Length
24
I don't have cupholder LEDs, but... if all of them on the port side are out, I would look first at the connection between the port and starboard sides. Either the wiring goes back from both sides to a single controller or there is one connection to the controller and the wiring splits at some point to go to the other side. That is most likely your issue. Very unlikely all of the cupholders on one side just went out all at the same time.
 
Top