Questions on Mid-Cabin and tower speakers for 2015-present 24' boats

[redthumper9]

I know several have installed mid cabin speakers in their newer 24' boats..... I've seen pictures of the location on the port side, but don't remember seeing them on the starboard side.
Also, those that have done tower speakers.... Any tips on wiring through the newer towers. More specifically, is there already holes at the bottom of the tower that are accessible when the tower is folded. (haven't folded my tower yet to check) or do you drill holes the exit the tower and then drill the hull to enter the boat?

 

[redthumper9]

..... I found what I needed on the mid cabin speakers. Now just questioning the tower

 

[J-RAD]

Here's a flashback to a write up if my install.

Upgraded the stereo again. Added a second pair of JL tower. Now the 4 tower speakers run off their own 4 channel amp with separate volume control so they can be cranked for boarders to hear. Also added 2 additional 6.5" speakers mid ship. Thru this experience I have reached a new level of intimacy with my boat. I've become familiar with it's many hidden gaps and crevices.

View attachment 74837
MX770-ETXv3-SG-WH

View attachment 74838
View attachment 74839
MX650-CCX-SG-TB

View attachment 74840
FRANKENSTEIN'S HEART!
M600/6
M400/4 w/remote volume M-RBC-1
M200/2 w/remote volume M-RBC-1

https://jetboaters.net/threads/the-official-what-did-you-do-to-your-jet-boat-today-thread.2661/post-304862

 

[J-RAD]

This thread might help you in terms of snacking wires up thru the tower. Although I'm not sure the differences between your limited tower and my AR tower.

https://jetboaters.net/threads/adding-led-tower-lights-2016-ar240.20019/#post-359223

 

[Hoyt]

This is from my 2020 195. Super easy to fish 2 12 gauge speaker writes through. I braided some bailing wire to easily fish. Port side was open like this