• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Removing Tower and Bimini

Scoop

Jet Boat Junkie
Messages
129
Reaction score
58
Points
127
Location
NJ
Boat Make
Yamaha
Year
2018
Boat Model
242 Limited E-Series
Boat Length
24
I have a 2018 2 Limited S E series and was wondering how easy it is to completely remover the tower and top temporarily? My firend has a two week shore rental in Avalon NJ that might requiring going under a low bridge to acess his dock. I have dropped the tower/bimini before but I am thinking if I will be going in and out daily for two weeks it might be a lot easier to just remove it.

Thoughts?

Thanks Scoop
 
The Bimini cage might be easy to remove, the tower is more difficult. Try to drop the tower down and measure assuming Bimini cage is removed to see if it will do. My 2019 has the shock absorbers but I know older models had a cable where you can remove the stop allowing the tower to drop lower. Do a search here, you will find some good info on this mod. Not sure if your 2018 has the cable or shock absorbers? Good luck!
 
Back
Top