Right size for registration lettering on boat?

[Ozzyj93]

Hey everyone. How do I know what the right size lettering for registration on my boat is? It’s a 19.5 footer. Looks like most are 3 inches in height as that is the minimum requirement in FL, but I’m wondering what would be the right size for my boat? I’ve done some research but haven’t found anything concrete. I don’t want the letters to look to big, or too small. Any help would be appreciated. Thank you!!

 

[Bluewater272]

Just go with the minimum, 3" looks fine on our boats. The length dictates itself based on the font.


This is 3” on a 24’ boat

 

[Ozzyj93]

Forgot to mention, not rly worried about the 3” height, but more about the length

 

[captras]

Registration lettering requirements depend on the individual state.

 

[Murf'n'surf]

Make sure that its a contrasting color to the hull. FWC and USCG love to hassel people about not being able to clearly read your FL #'s from a distance. And don't forget to leave a letters space after FL and again after the 4 numerals as shown in the link....

Numbering and Decals

Language | Idioma English Español All vessels registered and titled in Florida must display three types of identification: Florida registration number Hull identification number Registration Decal Registration Numbers The Florida registration number issued to a vessel is permanent and remains...

www.flhsmv.gov

 

[zipper]

3” for that boat, I used 3” on my Ar230 and the 19’ Whaler. I use 3 1/2” on my 35’ Bene.

USCG Requirements | BoatUS

An explanation of Boat Documentation Requirements, both State and Federal guidelines are outlined, with reference to the USCG official site.

www.boatus.com