• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Scarab Kicker Stereo System

Dachshund Dad Bob

Well-Known Member
Messages
10
Reaction score
1
Points
50
Boat Make
Scarab
Year
2020
Boat Model
215 ID
Boat Length
22
Have the upgraded Kicker stereo on my 2020 Scarab. Bought the boat used. The kicker coaxial transom speakers are not operating, but the LED lights do work. The Kicker tech indicated it is one plug in back of the speaker for the DC wires to the LED lights and the speaker wire, so it appears the connection at the speakers is good.

So am assuming the connection to the amp is loose. Can anyone tell me where the AMP is located? Under the dash?

Thanks,

Bob
 
Can you follow the wires back to it? Maybe start at the battery?
 
I believe it is behind the gauges
 
Have the upgraded Kicker stereo on my 2020 Scarab. Bought the boat used. The kicker coaxial transom speakers are not operating, but the LED lights do work. The Kicker tech indicated it is one plug in back of the speaker for the DC wires to the LED lights and the speaker wire, so it appears the connection at the speakers is good.

So am assuming the connection to the amp is loose. Can anyone tell me where the AMP is located? Under the dash?

Thanks,

Bob

It's two connections technically. You'll have the positive and negative of the speaker which will be covered by a little snap together doohicky and then spade connectors for the LED's, hooked to blue and common. Those all feed into the speaker as a pigtail which is 1 connection if you will.
 
Easy Fix! They never hooked up the speaker wires to the back of the speakers at the factory. I opened the hatch to the engines and the wires were just waiting to be hooked up! Thanks to everyone for helping me out!

Have a good weekend,

Bob
 
Back
Top