We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
My support poles have eaten through the cap on the bottom and have fallen off. What are you guys using on the bottom of the support poles to keep it from cutting the seadek
Use something larger like a plate. This way the weight is distributed and the seadek does not have an indentation in it when you take the poles out. We use large plastic discs cut from starboard.
I just went out to the shop and I think we can make a couple of discs from black starboard. I think they'd sell for $15-$20 per pair. They will have a little recess in the center for the leg to sit in and will do a great job of preventing the seadek pads from being indented. Thoughts?
I just went out to the shop and I think we can make a couple of discs from black starboard. I think they'd sell for $15-$20 per pair. They will have a little recess in the center for the leg to sit in and will do a great job of preventing the seadek pads from being indented. Thoughts?
I use a 3" plastic door stop disc. The kind that sticks to the wall. I also replaced the rubber feet on the poles. You can pick those up at any decent hardware store.