Welcome to Jetboaters.net!

We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

Seadek vs Cover support poles

Thread starter Evil Sports
Start date Jun 4, 2018
Tagged users None

Sacamano

Jet Boat Junkie

#21

Intriguing. What do you do when you are trailering?

Scottie

Jetboaters Commander

#22

Installed the hangtyte system this weekend. Much easier than the poles, and no worries for the seadek. Highly recommended.

THE 2013 212x

Performance:
Ribbon/snorkle delete; blower upgrade (2x spal fans); L13 cones; 6CW impellers; delrin wear rings;
Electrical/electronics:
RideSteady/Hydrophase GPS Speed Control; 150A Helm Aux 12V Circuit w/fused panel; Onboard NOCO 2-bank charger w/NOCO Outlet; LED nav light; wired LED tow point anchor light; Triple RGB transom light; 4 zone interior RGB LED lighting; One-Off custom dash cap and instrument panel with flushmount SIMRAD Go7 and temperature gauges for each engine. Custom lower switch panel for lighting w/ Blue Sea voltmeter; Custom blue rocker switches on Blue Sea dimmer; Relocated no wake mode switch to throttles; Relocated battery switch to custom enclosure for easy access; Push-button start kit from @mainah;
Audio:
Sony DSX-M80 w/ wired swimdeck remote; 6x JL mx650; 6x 10" subwoofers JL M1IB5; 4x JL 770 tower speakers; 3 JL marine amps (2x m600/1 and 1 m800/8v2);
Handling:
Throttlesync; Cobra Steering; JBP lateral thrusters;
Wake:
WakeWedge; Custom swimdeck bag from @jcyamaharider; 3x 800lbs fully integrated ballast; Quick connect auxilliary fill port; 4x Jabsco Ballast King pumps. 4x 1" thru hull intakes. 3200 lbs of ballast in 6 minutes or less.
Cabin/Hull/Misc:
EZ locks; additional factory cleats; bow/ladder grab handles; gas strut and slam latch for anchor locker; Gem Products stainless latches throughout; longer gas strut for ski locker (opens fully); Mini strut for passenger glove box; Garelick hydraulic seat post; BolsterBuddy; Seadek Full Set w/ custom/extra Pcs; Yamaha swivel board rack w/ custom fork; Premium Yamaha Cover; Hangtyte System; Billet bilge/bypass fittings; Stainless scupper; Fortress FX-7 anchor modified to fit factory locker;

W

Weeb

Jetboaters Captain

#23

Sacamano said:
Intriguing. What do you do when you are trailering?

I haven’t had to do this yet but I would imagine you could just loosen the lines and it would be like no pole towing.

You must log in or register to reply here.

Share:

Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email Link

Top