• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Shorelander trailer lights

anmut

Jetboaters Admiral
Messages
2,528
Reaction score
2,359
Points
257
Boat Make
Yamaha
Year
2020
Boat Model
212S
Boat Length
21
I replaced my shorelander bulb lights ($56k boat comes with bulbs, wtf Yamaha), with shorelander LED's - plug and play. First time I launched I unplugged out of habit, but haven't since, and everything works great. That's about 50 launches and recoveries ago.
 

Speedling

Jetboaters Admiral
Messages
5,099
Reaction score
4,288
Points
432
Location
Cedar Lake, IN
Boat Make
Yamaha
Year
2008
Boat Model
SS
Boat Length
21
I had read that it is recommended that when backing your trailer into the water you should disconnect the electric plug from your truck. I've been doing this, but is it really necessary?
Electric will follow the path of least resistance which means the wires not the water will carry the current. 12v is far different than the stuff for plugging in yachts etc.
 

212s

Jetboaters Captain
Messages
2,260
Reaction score
1,597
Points
227
Location
1000 Islands
Boat Make
Yamaha
Year
2020
Boat Model
212S
Boat Length
21
Electric will follow the path of least resistance which means the wires not the water will carry the current. 12v is far different than the stuff for plugging in yachts etc.
That holds true as long as the wiring is good on both the trailer and tow vehicle. I've been an advocate of unplugging the trailer for years just to ensure my tow vehicle doesn't get zapped. When backing up, I use a magnetic surge lockout key and it works great to disable the brakes.
 

justamon

Jet Boat Lover
Messages
66
Reaction score
21
Points
82
Location
Las Vegas
Boat Make
Yamaha
Year
2019
Boat Model
FSH Sport
Boat Length
19
I replaced my lights with L.E.D.'s and the driver side brake and signal on the new L.E.D. tail light is not working. I noticed signs of corrosion everywhere. I tried spraying electric cleaner on everything to no avail. I really hope I don't have to replace the wiring. I think unplugging the lights is probably the best way to go.
 
Top