• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Starboard Engine Overheat Warning

Simon

Simon

Jet Boat Lover
Messages
40
Reaction score
23
Points
67
Boat Make
Yamaha
Year
2019
Boat Model
AR
Boat Length
24
Had the overheat ding on my 2019 ar240. Towed another boat for awhile then had a 30 mile run after. All seemed fine until got to landing. Then the overheat code came on. Noticed earlier in the day that the starboard was stiff coming out of reverse. Anyone ever experience that?
 
djetok

djetok

Jetboaters Admiral
Messages
1,745
Reaction score
1,813
Points
262
Location
Edmond, ok
Boat Make
Boatless
Year
2015
Boat Model
SX
Boat Length
21
Simon said:
Had the overheat ding on my 2019 ar240. Towed another boat for awhile then had a 30 mile run after. All seemed fine until got to landing. Then the overheat code came on. Noticed earlier in the day that the starboard was stiff coming out of reverse. Anyone ever experience that?
Click to expand...
Stiff coming out of reverse?

The binnacle was hard to move?
Simon said:
Had the overheat ding on my 2019 ar240. Towed another boat for awhile then had a 30 mile run after. All seemed fine until got to landing. Then the overheat code came on. Noticed earlier in the day that the starboard was stiff coming out of reverse. Anyone ever experience that?
Click to expand...
Bump

you might think about starting a new thread in the general forum
 
Simon

Simon

Jet Boat Lover
Messages
40
Reaction score
23
Points
67
Boat Make
Yamaha
Year
2019
Boat Model
AR
Boat Length
24
Dig around and found the problem. Chewed up plastic bottle. Now to reset the code. Did however find what appears to be stress cracks in the gel coat near the stern seat storage
 
djetok

djetok

Jetboaters Admiral
Messages
1,745
Reaction score
1,813
Points
262
Location
Edmond, ok
Boat Make
Boatless
Year
2015
Boat Model
SX
Boat Length
21
Simon said:
Dig around and found the problem. Chewed up plastic bottle. Now to reset the code. Did however find what appears to be stress cracks in the gel coat near the stern seat storage
Click to expand...
It will reset after its cleared and running with no further warnings. Other wise you can remove the battery cable for 20 to 30 minutes , could be a shorter time as well.
 
Cprokselsx240

Cprokselsx240

Member
Messages
1
Reaction score
0
Points
10
Boat Make
Yamaha
Year
2016
Boat Model
SX
Boat Length
25
2016 yamaha sx240 started to overheat took to shop they Replaced O2 sensors so far got it back ran great for 1520 minutes started overheating again took back to the dealership now they can’t figure out what’s going on the boat is throwing another code while there and they’re saying something about throttle valve I’m personally thinking Corroded thermostat or bad impeller. Just got a call from mechanic now they’re saying port engine will not turn over Bought the boat from salt water now it’s only used in freshwater
 
You must log in or register to reply here.
Top