We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
I found some but lost the link. I think the yellow / red wire is not needed. Mine is broken off and hanging there and that's why I looked for switches. I swapped the plug to the other switch and it started just fine with the broken wire. I'm not 100% on this, but I think the lanyard and clean out port switch link into the key switch to allow cranking but no start (lanyard) or no cranking (clean out)