• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Stern Pull Handle

weaselman

Jetboaters Lieutenant
Messages
154
Reaction score
119
Points
152
Location
Waterford, CT
Boat Make
Yamaha
Year
2015
Boat Model
Limited S
Boat Length
24
Since my boat is at the dealers I cannot confirm if the stern pull up handle can be removed (the one between the back cushions). We want to place a logo in the center and the graphics guy said it would be easier to remove the handle, attach the logo and then put the handle back.

I have attached a picture of the handle I am referring to. 20180309_094753.jpg
 
Of course it can be removed. Open up your clean out tray and poke around for the nuts.
 
Had to remove mine to get the decal on. Be careful not to drop the nuts.
 

Attachments

  • Boat Name.jpg
    Boat Name.jpg
    132.3 KB · Views: 18
14156399_1006904009407032_2029626212_n.jpg
 
Dropping your nuts sucks when they are stainless!
 
Back
Top