• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

sx210 electrical problems

Rogerrowe

Member
Messages
2
Reaction score
0
Points
20
Boat Make
Yamaha
Year
2014
Boat Model
SX
Boat Length
21
I recently purchased a 2014 SX210 with 230 hours.the boat worked great for 2 weeks.
Then my speedometer stopped working and now my starboard tach doesn’t even light up.
I show a N2K as well as a speed comm error on startup on my port Tachometer.
I can’t imagine both Speedo and tach failure at the same time.
I did swap the port and starboard and the port tach powered up on the starboard connectors but the starboard tach still doesn’t power up on the port connectors.
Does the hull sensor control this?
 
Not sure if this helps any, from the service manual
how to confirm if the speed sensor is working.

As well as verify the meter voltage.

IMG_3412.png
 
I will check this on the weekend and post my findings
 
Back
Top