• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • JetBoaters.Net 2nd Annual SeaDoo Switch Group Buy Sponsored By JetBoatPilot Is Live Now. Save 25% Off Select SeaDoo Switch Gear through October 31st.

    Click Here to go to the Jetboatpilot Seadoo Group buy

    You can delete this notice with the "X" in the upper right>>>

SX250 winterization

ragingrhino

Member
Messages
21
Reaction score
13
Points
12
Location
SE Pennsylvania
Boat Make
Yamaha
Year
2024
Boat Model
SX
Boat Length
25
So im a first year owner of a 2024 SX250 and im doing the winterization myself because the dealership wanted $399 for winterization. I have a couple questions.

First is around the fogging. Do i need to remove the air filter cover then the air filter to fog it? Can i just remove the one hose at the top and spray it in there?

Second question is around the gas tank. I bought the Stabil but im curious if i should leave the tank empty or fill it up to sit for the winter? My buddy who has an outboard Lund and has been a boater his entire life said he runs it to near empty puts his stabilizer in and winterizes.

Much appreciated for the help.
 
Fill tank would be most recommendation......the reason is less room for the tank to sweat during cold and warmer days. Add any good stabilizer will do and this is where the full tank comes back in play................. Stabilizer is a mixtures of oils some oils mix with the gas and are drawn in to lube the injectors this keep corrosion to a minimum...........the oils also add a protection layer between the gas and the air coming in your vent. The oil is a barrier so 02 can not attach to the fuels long chain molecules. Attachment is a bad thing as it promotes gas to degrade. Empty tank sweats more(adds water) and more room/volume means more air to attack the gas.

The oils slow the process but does not stop it so less air/volume the better.

Hope this helps a little
 
Now expanding on the above topic a sealed tank would slow the gas degrading but sealing a plastic tank is VARY bad as the heat and cold air and gas expands the tank could rupture the plastic at the seams. Last point some storage facility will not allow full tanks on boat using storage racks........ as the same hot cold expansion of fuel can allow some gas to purge out of the vent and drip down on the boat below running their interior ect...............
 
Back
Top