• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Thrust Vector XV HELP with install

AJACHIM

AJACHIM

Jet Boat Addict
Messages
132
Reaction score
58
Points
87
Location
Lake Lanier, GA
Boat Make
Yamaha
Year
2018
Boat Model
AR
Boat Length
19
Hey guys so I followed Wills video @JetBoatPilot for my 2018 ar 190. My question is when I go hard right or hard left I feel like the fins from the thrust vector slightly make contact with the JBP lateral thruster and I am wondering if this will cause any issues. There is no sticking of the bucket in either up or down position and I have no issues turning the steering wheel.
I uploaded a video showing what Im talking about. Thanks for the help in advance.
 
JetBoatPilot

JetBoatPilot

Event Sponsor
Event Sponsor
Vendor
Messages
3,136
Reaction score
3,392
Points
362
Location
Panama City, Fl
Boat Make
Yamaha
Year
2016
Boat Model
Other
Boat Length
19
I don't think you'll see any issues with that. The rub is very minor and it is plastic to metal so you should be fine.
 
You must log in or register to reply here.
Top