Osric
Jet Boat Addict
- Messages
- 49
- Reaction score
- 19
- Points
- 97
- Boat Make
- Yamaha
- Year
- 2017
- Boat Model
- 242X E-Series
- Boat Length
- 24
The swim ladder is held in place by four bolts that go into the underside of the swim platform. Since I don't have easy access to a trailer or work area for installing my wake wedge, I was trying to figure out the torque spec and had a draft posting asking about it before I finally managed to buy the e-book version of the service manual.
The swim ladder on the 242x E-Series is held up by 4 M8 x 35mm bolts and sealed with ThreeBond 1344N, tightened to 17nm. This is a specific torque spec for these bolts and is different than the generic torque spec for M8 bolts on the boat.
Osric
The swim ladder on the 242x E-Series is held up by 4 M8 x 35mm bolts and sealed with ThreeBond 1344N, tightened to 17nm. This is a specific torque spec for these bolts and is different than the generic torque spec for M8 bolts on the boat.
Osric