guelo_ar250
Member
- Messages
- 9
- Reaction score
- 18
- Points
- 12
- Boat Make
- Yamaha
- Year
- 2024
- Boat Model
- AR
- Boat Length
- 25
Having hard time running wires trhu the tower. Any help please. Ar250 2024
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Tower speaker wires
- Thread starter guelo_ar250
- Start date
- Tagged users None
Ronnie
Jetboaters Fleet Admiral
- Messages
- 8,544
- Reaction score
- 11,412
- Points
- 647
- Location
- SF Bay Area
- Boat Make
- Yamaha
- Year
- 2010
- Boat Model
- Limited S
- Boat Length
- 24
Consider runnning a thin line in as far as you can and use a vacuum to pull it through.
FSH 210
Active Member
- Messages
- 1
- Reaction score
- 0
- Points
- 30
- Boat Make
- Yamaha
- Year
- 2019
- Boat Model
- FSH Sport
- Boat Length
- 21
I ran the wires for my 2019 FSH 210 Sport when I installed tower speakers and spreader lights. Some of the crossmembers were not hollow where they attached to the "main" support structure. I ended up having to jump from one to the other using a step bit and drilling new holes. I put a rubber grommet around the holes after drilling. Worked out well. I put wire protector on the exposed areas. Looks professional IMO. I also pulled string through for any future projects I might have that requires pulling more wire. Not exactly sure about the AR but I hope this helps.
Attachments
Marvin willis
Jetboaters Admiral
- Messages
- 1,444
- Reaction score
- 860
- Points
- 252
- Location
- Morehead city nc
- Boat Make
- Yamaha
- Year
- 2018
- Boat Model
- AR
- Boat Length
- 24
Do you have fish tape. That’s how I ran mine
sunbyrned
Jetboaters Captain
- Messages
- 1,323
- Reaction score
- 852
- Points
- 212
- Location
- Louisville, KY
- Boat Make
- Yamaha
- Year
- 2012
- Boat Model
- 242 Limited S E-Series
- Boat Length
- 24
Not tried this on the tower but I’ve had success with a magnet on other projects. This might work well particularly if you’re starting from the bottom and you want to direct it upwards. If you try it, maybe place a piece of paper or something under it so it doesn’t mark up the finish. The other ideas above are good too.