BudMC77
Member
- Messages
- 2
- Reaction score
- 0
- Points
- 10
- Boat Make
- Yamaha
- Year
- 2024
- Boat Model
- AR
- Boat Length
- 19
First time posting, long time reader.
Have a 2024 AR195 that I'm attempting to add a BEP 716 cluster with the DVSR. My goal is to completely isolate the house battery and the start battery. Or at least, have the radio/USB socket/accessories on the house battery while leaving engine operations on the start battery. Is this feasible considering the 195 was built for single battery? I have the service manual and it doesnt include a boat wiring diagram, only the engine harness wiring. I found the 195S service manual and it does in fact include the diagram but unfortunately the 195 is wired a little differently. Such as having a separate fuse for the radio and USB.
Any reason why the diagram would be omitted from the service manual? Anywhere else to find the diagram.
I would imagine the only option would be to run new power wires for accessories that would be on house battery. Which existing factory wires would be wired to the switches? Attached are BEPs diagrams on wiring the switches.
Thanks in advance.
Have a 2024 AR195 that I'm attempting to add a BEP 716 cluster with the DVSR. My goal is to completely isolate the house battery and the start battery. Or at least, have the radio/USB socket/accessories on the house battery while leaving engine operations on the start battery. Is this feasible considering the 195 was built for single battery? I have the service manual and it doesnt include a boat wiring diagram, only the engine harness wiring. I found the 195S service manual and it does in fact include the diagram but unfortunately the 195 is wired a little differently. Such as having a separate fuse for the radio and USB.
Any reason why the diagram would be omitted from the service manual? Anywhere else to find the diagram.
I would imagine the only option would be to run new power wires for accessories that would be on house battery. Which existing factory wires would be wired to the switches? Attached are BEPs diagrams on wiring the switches.
Thanks in advance.