not2fast
Jet Boat Addict
- Messages
- 36
- Reaction score
- 5
- Points
- 87
- Location
- Twin Cities
- Boat Make
- Yamaha
- Year
- 2007
- Boat Model
- AR
- Boat Length
- 21
Anyone know the diameter of a 2016 212x? It should be the same from 2012-2016.
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Did you end up getting the 2”? Did it work?I was looking at getting this rack. I have a 2019 AR210 as well. Are you saying you ordered the 2" adaptor? I want to make sure I order the right one.
Monster Wakeboard/Surfboard Combo Rack
Instead of a mirror that attaches to your tower, you could go with one that clamps to the frame of your windshield. This CIPA 02000 COMP Universal 7" x 14" Marine Mirror is what I use on my AR210.I need to know the OD of my wake tower tube so I can buy the right mirror. Anybody know? The suction cup mirror that came with the boat is a joke.
Thank you. I figured that out. I bought a PTM Edge 100 Pro. Same size as the one you recommended. We’ll see how that works out. Thanks again.Instead of a mirror that attaches to your tower, you could go with one that clamps to the frame of your windshield. This CIPA 02000 COMP Universal 7" x 14" Marine Mirror is what I use on my AR210.
That PTM mirror looks awesome. BTW, if it's about the same size as the one I have, it might fit inside the Plano Shallow Dry Storage Box (141250). That's what I keep my mirror inside when I'm not using it (e.g., when the boat's covered, or when we're fishing instead of wakeboarding).I bought a PTM Edge 100 Pro. Same size as the one you recommended.
yes, I believe the measurements are identical. Thanks!That PTM mirror looks awesome. BTW, if it's about the same size as the one I have, it might fit inside the Plano Shallow Dry Storage Box (141250). That's what I keep my mirror inside when I'm not using it (e.g., when the boat's covered, or when we're fishing instead of wakeboarding).
Any idea what a 2009 yamaha 232 limited tower would beI was looking at ordering a new surf rack this weekend and when I searched, there were many questions about tube sizes on various towers, but no concise thread with that information.
Here is what I found, feel free to add if anything is missing or incorrect:
- All E-series boats - 2 3/8 front and rear and 1 5/16" Bimini tube.
- All year 242 LS and 212X - 2 3/8"
- 2014 and older AR240, AR230, AR210 and AR190 - 1 7/8"
- 2015 and newer AR240 - 2 3/8" front, 1 7/8" rear
- 2016 and newer AR192 and AR195 - 2 3/8" front, 1 7/8" rear
- Scarab 215 HOI - 2 3/8"
- The 1·7/8'' OD rear tubing of my 2019 AR210 tower actually measures 1.925'' (1·37/40''), due to the factory-applied powdercoat on the tower. Therefore, the 1·7/8'' aluminum shims that came with my Monster Tower Swivel Adapters do not fit onto the tubes. I had to order 2'' shims and then build up the tubing size with a few wraps of heavy-duty self-fusing tape.
Rear tube is 1 7/8’s if ordering a Monster rack get 2” shims.2017 AR210?