satovod
Jetboaters Captain
- Messages
- 113
- Reaction score
- 488
- Points
- 207
- Location
- Turkey/Russia/Spain
- Boat Make
- Yamaha
- Year
- 2018
- Boat Model
- 242X E-Series
- Boat Length
- 24
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Try to fix or replace?
- Thread starter satovod
- Start date
swatski
Jetboaters Fleet Admiral 1*
- Messages
- 12,806
- Reaction score
- 18,576
- Points
- 822
- Location
- North Caldwell, NJ
- Boat Make
- Yamaha
- Year
- 2016
- Boat Model
- AR
- Boat Length
- 24
Doesn’t look too terrible, if you are not getting a lot of cavitation (port pump?) probably okay to just file/smooth the edge up a bit.
—
—
GTBRMC
Jetboaters Admiral
- Messages
- 2,438
- Reaction score
- 2,338
- Points
- 327
- Location
- Waukesha, WI
- Boat Make
- Boatless
- Year
- 2008
- Boat Model
- SX
- Boat Length
- 23
Agree with @swatski - does not look too bad.
Did you pull it due to cavitation? If so, filing the edge a bit or gently pounding it out just a bit would be worth a shot before replacing it. If you are not having any cavitation symptoms, you might want to just leave it alone. Make sure to look at both impeller blades and pump surfaces to make sure you don't have any cavitation-related metal erosion.
Good luck!
Did you pull it due to cavitation? If so, filing the edge a bit or gently pounding it out just a bit would be worth a shot before replacing it. If you are not having any cavitation symptoms, you might want to just leave it alone. Make sure to look at both impeller blades and pump surfaces to make sure you don't have any cavitation-related metal erosion.
Good luck!
satovod
Jetboaters Captain
- Messages
- 113
- Reaction score
- 488
- Points
- 207
- Location
- Turkey/Russia/Spain
- Boat Make
- Yamaha
- Year
- 2018
- Boat Model
- 242X E-Series
- Boat Length
- 24
Pulled out because of impeller housing swelling.
No cavitation at all on any rpm, but top speed lower than before
No cavitation at all on any rpm, but top speed lower than before
