Where is the low oil pressure sensor? 2019 Scarab 255 Twin Rotax 1.5L HO 4-TEC

[ScratchCoin]

I need to change my low oil pressure sensors but don't know where they are! Could someone post a photo or give a good description on how to find them so I can get back on the water! Thank you in advance!

I have a 2019 Scarab 255 w/ Twin Rotax 1.5L HO 4-TEC.

 

[Luc Lafreniere]

I'll PM you some help.

 

[ScratchCoin]

Thank you for the help! I found it...but..next issue, lol! How the heck do I change it! I can barely reach it, it's well hidden under the intake manifold and a few very stiff hoses.

If anyone has done this before, any help would be appreciated!

 

[Luc Lafreniere]

I suggest you look on YouTube for sea-doos. It's essentially the same engine. I suspect you'll find some videos there.

 

[ScratchCoin]

Thanks again! I didnt know the sea-doos had the same engine. After watching these two videos, it seems like the same procedure will work. Basically it seems like you have to remove the hose from the super charger, then remove the throttle body, then you can access the sensors (port side). for the starboard side, I think Ill have to remove two coolant reservoirs and then the throttle body. This just turned into a several hours project so will post again with the How To for this specific model.