mb300sd
Jet Boat Junkie
- Messages
- 77
- Reaction score
- 56
- Points
- 127
- Location
- Athens, GA
- Boat Make
- Yamaha
- Year
- 2009
- Boat Model
- AR
- Boat Length
- 23
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Boats MUST LIST A LOCATION (State)IN THE TITLE (Seems people can't read lately)-along with Make/Model/Year
I have a Morse 4 lever installed that I'm keeping to put in my new boat. The factory shift lever was completely seized up from corrosion.Sadness.
Does the throttle stay in place without having to hold it? If so, I might be interested in the whole assembly if you're interested in pulling it out or giving me twenty minutes of screwdriver time. Where's it located?
Sorry, already sold both of those.If the glovebox assembly is in nice contition i am interested in it, also interested in the Gauge cluster
@smthng are you having problems with your throttles? you know we have an good fix for that in the FAQ https://jetboaters.net/faq/how-to-stop-your-throttles-from-slipping-back-adjustments.44/Sadness.
Does the throttle stay in place without having to hold it? If so, I might be interested in the whole assembly if you're interested in pulling it out or giving me twenty minutes of screwdriver time. Where's it located?
I'm not sure what part you're talking about, do you have pictures? I never got a PM and can't get to the boat for a day or 2.@mb300sd , do you have the rear swim platform plastic covers that go over the hinges for the platform? PM'd you with more details
Starboard looks ok, port is cracked. Make me an offer.Thank you. See the item circled in red here. I could use either/both sides if you have them:
Windshields are already sold, sorry.@mb300sd, did you see that @Kallie lucas is asking about the windshields?
My LS2000 was the victim of a hit and run last year that sent it off the trailer and sliding along the road. I'm parting her out now, need the parking spot for my new AR230.
Hello does the boat still have the cleanout ports intact? I am interested in how the factory installed them as mine are both leaking and I need to seal them. Parts diagrams show possible fasteners at 4 corners but I don't see any. I'm wondering if there are fasteners but the factory fiberglassed over them after installation. I would maybe be interested in the ports and the plugs if you still have them. Or if anyone else knows if there are fasteners or how these can come out. (The actual port that is sealed in the hull) I don't want to just seal the edges I want to reseal the whole fixture but need to remove first. Thank you