• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Boat Wax?

Skier160

Active Member
Messages
3
Reaction score
1
Points
30
Boat Make
SeaDoo
Year
2018
Boat Model
Jet Ski
Boat Length
PWC
Suggestions for a good all around wax to use on fiberglass?
 

captras

Jetboaters Captain
Messages
1,224
Reaction score
1,347
Points
242
Location
Lake Livingston, Texas
Boat Make
Yamaha
Year
2016
Boat Model
242 Limited S E-Series
Boat Length
24
Quickie Sauce by Boat Bling works well for me... available on Amazon
 

Skier160

Active Member
Messages
3
Reaction score
1
Points
30
Boat Make
SeaDoo
Year
2018
Boat Model
Jet Ski
Boat Length
PWC
Thanks for the responses!
 

swatski

Jetboaters Fleet Admiral 1*
Messages
12,806
Reaction score
18,566
Points
822
Location
North Caldwell, NJ
Boat Make
Yamaha
Year
2016
Boat Model
AR
Boat Length
24
Klasse, All-in-one. Hard to go back to anything else after that.

--
 

Tms1224

Jet Boat Lover
Messages
50
Reaction score
64
Points
67
Location
New Hampshire/Mass
Boat Make
Yamaha
Year
2018
Boat Model
242 Limited E-Series
Boat Length
24
Have a pretty good connection for ceramic coating so did that.. I use a spray detailer for touching up and maintenance.
 

suke

Jetboaters Admiral
Messages
2,081
Reaction score
2,534
Points
267
Location
Holly Springs, NC
Boat Make
Yamaha
Year
2020
Boat Model
X
Boat Length
21

djetok

Jetboaters Admiral
Messages
1,745
Reaction score
1,813
Points
262
Location
Edmond, ok
Boat Make
Boatless
Year
2015
Boat Model
SX
Boat Length
21

swatski

Jetboaters Fleet Admiral 1*
Messages
12,806
Reaction score
18,566
Points
822
Location
North Caldwell, NJ
Boat Make
Yamaha
Year
2016
Boat Model
AR
Boat Length
24

djetok

Jetboaters Admiral
Messages
1,745
Reaction score
1,813
Points
262
Location
Edmond, ok
Boat Make
Boatless
Year
2015
Boat Model
SX
Boat Length
21
Do you guys apply this yourselves?
I'm very tempted to try this.

--
Yes it is easier than wax. I do it to all my vehicles even my semis. (Well employees do those) you cannot leave it on too long either. No boat bling at the ramp either. Just a damp used towel to wipe it down. On cars it makes washing so easy. Just follow the instructions , do not do at Temps above 85 degrees and let it cure for 12 hours. I will rejex the boat at the start of the season.

RejeX high gloss finish that protects

INSTRUCTIONS (a more thorough version than what we had room for on the label)Shake well.Apply to a clean, dry surface that is cool to the touch. Avoid appling in direct sunlight when ambient temperatures are greater than 85° F. On hot days, we recommend RejeXing in the shade, early morning or in the afternoon. For larger vehicles such as RVs, busses and yachts, a good trick for dealing with hot days is to apply RejeX to the top and western facing side in the morning and the eastern facing side in the afternoon, so that you're always working on the shady side.After RejeX dries to a haze (about 10-20 minutes), wipe off with a clean cloth. Unlike waxes that require strenuous rubbing or buffing to remove, RejeX should wipe off easily.Allow RejeX to cure for 8-12 hours out of the elements. The higher the humidity, the faster RejeX cures.While it it not uncommon for a RejeX treatment to last well over a year, for optimum protection, reapply every 6 months or as needed (e.g. when bugs and other contaminants begin sticking to leading edges of wings and front bumpers, when brake dust begins sticking more tenatiously to wheels, etc
 
Last edited:

Redneck_4Play

Jet Boat Addict
Messages
110
Reaction score
190
Points
122
Location
CONNECTICUT
Boat Make
Yamaha
Year
2014
Boat Model
X
Boat Length
21
Just ordered 2 bottles of Rejex for the boat and cars. Looking forward to the results.
 

swatski

Jetboaters Fleet Admiral 1*
Messages
12,806
Reaction score
18,566
Points
822
Location
North Caldwell, NJ
Boat Make
Yamaha
Year
2016
Boat Model
AR
Boat Length
24
Yes it is easier than wax. I do it to all my vehicles even my semis. (We employees do those) you cannot leave it on too long either. No boat bling at the ramp either. Just a damp used towel to wipe it down. On cars it makes washing so easy. Just follow the instructions , do not at Temps above 85 degrees and let it cure for 12 hours. I will rejex the boat at the start of the season.

RejeX high gloss finish that protects

NSTRUCTIONS (a more thorough version than what we had room for on the label)Shake well.Apply to a clean, dry surface that is cool to the touch. Avoid appling in direct sunlight when ambient temperatures are greater than 85° F. On hot days, we recommend RejeXing in the shade, early morning or in the afternoon. For larger vehicles such as RVs, busses and yachts, a good trick for dealing with hot days is to apply RejeX to the top and western facing side in the morning and the eastern facing side in the afternoon, so that you're always working on the shady side.After RejeX dries to a haze (about 10-20 minutes), wipe off with a clean cloth. Unlike waxes that require strenuous rubbing or buffing to remove, RejeX should wipe off easily.Allow RejeX to cure for 8-12 hours out of the elements. The higher the humidity, the faster RejeX cures.While it it not uncommon for a RejeX treatment to last well over a year, for optimum protection, reapply every 6 months or as needed (e.g. when bugs and other contaminants begin sticking to leading edges of wings and front bumpers, when brake dust begins sticking more tenatiously to wheels, etc
Great, thank you, very helpful.
Time to try this out.

 

Mainah

Jetboaters Admiral
Messages
3,016
Reaction score
4,049
Points
362
Location
Chapin, SC
Boat Make
Yamaha
Year
2016
Boat Model
Limited S
Boat Length
24
I have been a meguiars flagship guy for quite a while for the boat. This rejex thing has my attention as it seems much easier and longer lasting. I am assuming normal compound/polish then rejex? Is it good on dark surfaces and in high heat once cured?
 

Dean P

Jetboaters Admiral
Messages
3,471
Reaction score
4,915
Points
357
Location
Florida
Boat Make
Chaparral
Year
2017
Boat Model
VRX
Boat Length
22
Just ordered a 12 oz bottle of rejeX from amazon with $4 shipping for next day delivery. Wasn't happy with the Turtle carnaubu cleaner wax paste (even applied 2x). Hope this stuff last longer.
 
Top