• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Announcing the 2024 Jetboat Pilot 10th Annual Marine Mat Group Buy for JetBoaters.net members only! This is your best time to buy Marine Mat from JetboatPilot - you won't get a better price - 30% Off! Use Coupon Code JETBOATERS.NET at checkout.

    So if you are tired of stepping on really hot snaps/carpet, or tired of that musty carpet smell - Marine Mat is the best alternative out there! Get in on this now, or pay more later!

    You only have until September 30th to get in on this.....So Hurry!

    You can dismiss this notice by clicking on the "X" in the upper right corner>>>>>>>>

252 Questions

adrianp89

Jetboaters Admiral
Messages
5,377
Reaction score
4,363
Points
392
Location
Tampa Bay, FL
Boat Make
Yamaha
Year
2021
Boat Model
252SE
Boat Length
25
Boat is put away right now - any know the minimum and max width for the front anchor locker?

Second question is - how do you use the fresh water wash down? I cannot find anything in the user manual.
 
No body?
 
If you call Yamaha they should be able to answer those questions

1-866-894-1626
 
If you call Yamaha they should be able to answer those questions

1-866-894-1626

Have you ever tried to get answers from them? lol
 
adrianp89 Hey. Sorry. I don't have my boat yet and I am hoping to get a few measurements for myself here on another thread. I cant wait to get my boat and be able to "Pay forward" some of these questions in the future. They are so helpful when all we can do is plan, plan, plan o_O at the moment. Ive added a tape measure to my toolbox for when my boat comes.
 
The little holders for the anchor stock fit up to about an 18” stock. The opening is right at 15” wide where the stock would be resting in the holders. If you want an anchor that will hang securely in the holder, make sure the distance from the edge of one fluke where they meet the stock to the opposite tip of the stock is over 15” or you may need to modify something to prevent it slipping out of the holder if it shifts side-to-side.

And yes, fill the shower tank from the filler nozzle at the stern and then press the touch screen shower icon to power the pump. Too bad they didn’t program one of the unused stereo volume buttons at the stern to activate the shower or give it a switch/button if its own, that would have been convenient.
 
Thanks guys, I was actually looking at something like the FX7 for the anchor. Glad to know that fits perfect.

For the shower, when you fill it up, how do you know when it's full? Anything I should put in the water to make sure it doesn't get midewy? I assume the shower button is the one on the screen with all the lights? I wondered why I couldn't find a shower light.
 
Back
Top