• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Search results for query: gear lube

  1. Cobra Jet Steering LLC

    Housing Bearing come prepacked with grease?

    https://jetboaters.net/search/653619/?q=gear+lube+in+bearing&c[users]=Cobra+Jet+Steering+LLC&o=relevance
  2. Cobra Jet Steering LLC

    Smoke in Engine Compartment

    I move the engines forward buy disconnecting the motor mounts and a few hoses also do a search on adding gear lube to your intermediate bearings and pump..
  3. Cobra Jet Steering LLC

    Help - overfilled/overgreased intermediate bearing housing

    ...look through these posts when you have a few minutes. I never add grease to those it has no vent and will destroy the unit. I use gear lube if you do it the way I do the intermediate bearing lasts forever.
  4. Cobra Jet Steering LLC

    Smoke in Engine Compartment

    check the intermediate bearing behind the engine this one was blown out by over greasing it but when they go they must be replaced . . This one was totally blown apart. I use the gear lube routine on my bearings and pump that way they last a lot longer.
  5. Cobra Jet Steering LLC

    Help - overfilled/overgreased intermediate bearing housing

    ...the only fitting on the assembly and I make the hose long enough to access it so I don't need to get back behind the engine to put a little gear lube in , you can just unscrew the barb for access and then return it to the hole it goes in but I like the hose. Then when you want your pump to...
  6. Cobra Jet Steering LLC

    Pump Bearings Service Intervals / Replacemant

    Been adding gear lube to my pumps and my intermediate bearings for years do a search on here lots of info and on the intermediate bearings if you add gear lube the way I describe you won't blow the seals, I NEVER PUMP GREASE IN THOSE BEARING HOUSINGS I add gear lube day 1.
  7. Cobra Jet Steering LLC

    Housing Bearing (and Bearings) Failure - Jet Pump Unit repair

    There are many posts about pumping grease in the intermediate bearing housing and not adding grease but gear lube and same for the pump, I get twice the hours on my bearings adding gear lube to those rather than grease since it liquifies the existing grease and spreads better and a grease gun...
  8. Cobra Jet Steering LLC

    Pump pull 2021 SX210 help

    When you finish up do some reading on adding gear lube to your grease in the pump and intermediate bearing housing. To keep it liquified and allow it to flow better around the moving parts and the seals.
  9. Cobra Jet Steering LLC

    Rubber Shaft Coupling - anyone replace?

    ...so you can get a look at the grease in it, if it shows water or discolor it is bad and you will need to replace it, you can also inject gear lube into the housing directly using a plastic dental syringe and put it in where the hose barb is just remove it and then return you are when you...
  10. Cobra Jet Steering LLC

    Help - overfilled/overgreased intermediate bearing housing

    ...seals it may be ok but if it is pushed out the rubber on both sides it will leak . I had pictures I posted in some of those posts , the gear lube with the grease liquifies the grease lets it lube the parts and seals better and does not create pressure internally this shows how the parts have...
  11. Cobra Jet Steering LLC

    Starter solenoid replacement

    ...I get pump liner sections from www.sbtontheweb.com they have both regular and nylon liner type . Then put it all back together. while the pump is out see if there is any water in the pump and if it looks ok add some gear lube to the grease in the pump also . The search feature has all that info
  12. Cobra Jet Steering LLC

    Need assistance. Is this cable easy to fix?

    ...up the liner and impeller , I always order 1 extra liner so if I need it I can change it out easily While you are doing this add some gear lube to your pump grease and as long as the pump does not get any water in it it will last forever as will the intermediate bearings if you add gear lube...
  13. Cobra Jet Steering LLC

    Pump Bearings Service Intervals / Replacemant

    ...the o ring have the bow of the boat pointed down , use a big plastic dental syringe like the ones I showed on numerous posts to place the gear lube into the pump and then reinstall the cone. on the intermediate bearings remove the grease fitting inject some gear lube into the housing and...
  14. Cobra Jet Steering LLC

    Intermediate Bearing greasing

    just ad gear lube instead bearings will last forever with no issues I did several posts about it so do a search
  15. Cobra Jet Steering LLC

    Water coming out the back of the engine

    Also search not greasing it but placing gear lube in it instead
  16. Cobra Jet Steering LLC

    Greasing Intermediate Bearings - New Recommended Interval by Yamaha

    ...gun will blow the seals plus grease gets thrown from moving parts and has a tough time getting in under the seals to make those last so gear lube loosens the grease and takes care of all those issues. And in the jet pump it works wonders and you will probably NEVER have to rebuild one just...
  17. Cobra Jet Steering LLC

    Problems with steering and throttle.

    I would start at the beginning and rule things out. First disconnect the bolts that hold the cables to each nozzle. make sure the nozzles will turn freely to both sides. Next go to the helm and turn the wheel to both sides and see if if moves easily or it has resistance , resistance probably...
  18. Cobra Jet Steering LLC

    Intermediate Housing - Too Much Grease

    https://jetboaters.net/search/525102/?page=2&q=gear+lube+in+intermediate+bearing&c[users]=Cobra+Jet+Steering+LLC&o=relevance look through these posts when you have a few minutes.
  19. Cobra Jet Steering LLC

    losing sleep ... cone bearings

    just look up adding gear lube to your pump and your intermediate bearings it is just adding it to the existing grease to help it spread inside the housing and it won't blow out the intermediate bearings either. I just hit the search button and here are a lot of posts I would assume some will...
  20. Cobra Jet Steering LLC

    Intermediate Bearing greasing

    way over thinking this, just add the gear lube.
Top