• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Search results

  1. Frank Marshall

    Connext Screen for 2018 210 FSH SPT

    For my 1018 210 FSH, I believe the pins are as follows (although I have not confirmed): Oil Pressure - ECM Pin 17 Pink/White shorts to ground. Over temp - ECM Pin 24 Pink shorts to ground. I believe the AlbaCombi analog to Y2K can hook up to the generators for rpm and hours. Fuel Level - Fuel...
  2. Frank Marshall

    Connext Screen for 2018 210 FSH SPT

    In my communication with Yamaha Customer Service, they told me that they have been in dispute with the display manufacture. They have developed a trouble shooting committee to try and resolve. I sent them an email suggesting that if they built a gateway for Yamaha boats to interpret their...
  3. Frank Marshall

    Connext Screen for 2018 210 FSH SPT

    I'm still waiting. Coming up on 2 years. Ordered 2022/05/30.
  4. Frank Marshall

    210 FSH "Perfect" transducer setup - What is it?

    I finally found a mount location that solved losing sonar at higher speeds (30 mph). First I found this video done by Lowrance. It demonstrates how an air foil develops at speed with an unprotected sonar mount, causing a loss of sonar readings. It was very tuff to find a protected mount spot on...
  5. Frank Marshall

    210 FSH trolling motor mount pics?

    I used stainless, I think 1/4". More important, I used nylon locking nuts that vibrated loose. Added loctite on the second try. No loose nuts 3 years later.
  6. Frank Marshall

    Connext Screen for 2018 210 FSH SPT

    I called Yamaha trying to get some help. They told me they expected a shipment of screens to arrive early July, but not written in stone. Let's cross our fingers. They also asked for my 8-10 digit Yamaha order number to assure I was in the que.
  7. Frank Marshall

    Engine Anode

    I edited my comment from early, because it will make a big difference in engine anode life.
  8. Frank Marshall

    Engine Anode

    And they're a pain to get to on a 210. As I said above, I was able to access them with a flex extension on my 3/8 ratchet. It's just awkward. I also used a magnet to pull them out.
  9. Frank Marshall

    Engine Anode

    Unless you're in a lot of salt water, I bet they are fine. From the wear on mine, I recalculated the next replacement at 1000 hrs. But, I have put a lot of effort into bonding all the metal in the boat. With that, the engines are bonded to the jet anodes. With an ohm meter I get less than 10...
  10. Frank Marshall

    Engine Anode

    200 hrs
  11. Frank Marshall

    Engine Anode

    I was able to replace mine without disassembly of additional parts. I purchased a 3/8" flex drive to reach down and bend 90 degrees to get to them. They did come out without much of an issue. Because I'm mostly fresh water, they didn't need to be replaced yet, but since out, I did.
  12. Frank Marshall

    2020 FSH Shore Land’r Trailer loading issues

    I adjusted the left side rear trailer bunk. Bringing it towards center one notch on the back attachment bolt. After that, it usually centers up during loading, if not, it centers up over a short period of driving, every time.
  13. Frank Marshall

    Shorelander trailer wheel stud sizes

    I found these, Stud Bolts. They appear to be oem parts. Matched shoulder height, diameter, and length leaves 3/16" extended beyond the lug nut.
  14. Frank Marshall

    Connext Screen for 2018 210 FSH SPT

    I've had the same part on order since May 30, 2022. Same issue with delivery and delamination. Ordered from Yamaha Sports Plaza.
  15. Frank Marshall

    Keel Mount Transducer

    Were you happy with the transducer performance?
  16. Frank Marshall

    White Powder Coat Touch Up for T-Top Tower

    I have Color Rite 5967, but have not ordered nor color matched.
  17. Frank Marshall

    2018 FSH 210 - Center console "wiggle"

    I removed the sheet metal screws and replaced with regular screws and nylock nuts on the back side. All the screws were accessible. My T-top shimmies sometimes. It seems to require the right wave rate and size, along with boat speed.
  18. Frank Marshall

    2018 SX-210 TR-1 Engine anode pulled today. What do you think?

    May not need to remove the fuel intake to replace the anodes. I found this on youtube: Yamaha TR-1 engine anode replacement
  19. Frank Marshall

    FSH 210 Soundproof

    I used this material: Soundown Foam Composite It worked well, but I can't say it made the engine noise any quieter.
  20. Frank Marshall

    Yamaha FSH 210 36V Lithium Trolling Motor Battery Runtime

    I had 3 - 12v 100 ah batteries, and found I wasn't getting enough trolling time. I purchased a Balmar SG200 battery monitor, and found many times amperage rates were pushing the upper teens. In your case 63ah/18 amps = 3.5 hrs I have since switched batteries to 3 - SOK 206 ah lithium batteries...
Top