• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

gelcoat

  1. Solvent Chart for Gelcoat.png

    Solvent Chart for Gelcoat.png

  2. midwest22

    Gel coat chip at bow roller

    I picked up my new 212S out of state on the 15th and drove it home about 8 hours. For the drive I put a small towel between the stock roller and the bow since I had read the stock roller can cause some scratches on a long trip. Bow looked good when I got home. I order a stoltz from @JetBoatPilot...
  3. bradmartin

    Gelcoat color matching 2022 AR210 (blue/white color combo)

    Anyone know who to contact or how to find the correct gelcoat color to repair some dings in the gelcoat on the 2022 AR210 (blue/white color combo)? Will be my first time making such repairs and want to be sure I have the right tools/supplies to do the job correctly. I've watched numerous videos...
  4. A

    Gel Coat / Fieberglass Help

    Hi All, fairly new Yamaha owner. I bought the boat with this already on it and want to fix it. Can any one tell me what to patch it with? Can I just use GelCoat patch or do I need to patch it then GelCoat on top?
  5. B

    Water Leak through gel coat repair

    I bought a 2017 AR190 two months ago that was is great condition with only 40 hours. I have been reading the forums for a while and have learned how to do just about everything from this forum. The only issue with my boat was a gouge in the gel coat. The original owner had patched it with some...
  6. JetBoatPenguin

    What would you do to this Hull?

    So I did a cleaning of the "new to me boat" this past weekend, and what I found was some of the gelcoat and finish rubbed off the keel (mostly starboard side - which makes sense since that is the Captain's side). The prior owner had the boat on a lift - so I am thinking its been there for a...
  7. M

    Small cracks in clear coat

    After being dropped off at the dock to get the trailer, my friend was piloting the boat and hit the rear starboard corner of my AR 240 HO on the dock. Later on (while performing deep-breathing exercises in order not to kill my friend :) ) I was buffing out the scuff mark caused by the collision...
Top