• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

trailer brakes

  1. D

    210 FSH Trailer Brakes

    So like many of you, I'm having issues with my trailer brakes. Factory dual axle Shorelandr trailer that comes with the 210, the left rear rotor heating up to almost 600 degrees. I want to start by replacing the caliper. I searched the vin on Shorelandr and found the part #SK0045 for the left...
  2. n8dogger32

    Shorelandr Trailer Brake Hose/Connection Compatibility

    Anyone changed their brakes over to Kodiak disc brakes? I started the project this weekend and went to hook up the brake lines and sure enough, not the same connection type. Kodiak hoses use 3/16" Male inverted flare fittings with a swivel that use 3/8-24 thread but Shorelandr has different...
  3. CaptRedbeard

    2006 MFI 210 Trailer Refurbishing

    Hey all. New to me 2006 AR210 and I’m refurbishing the trailer. I’m new to surge brake systems. Actuator is a UPF A-70 which is an older model A-75 from what I understand. When I bought the boat, the trailer had a snapped brake line and a frozen actuator shock. Got those fixed and everything...
  4. okula225

    Trailer brakes troubleshooting

    Afternoon All, I purchased a boat in the beginning of a cold February in NJ (crazy I know) Came with a very clean trailer, however later found that the brakes didnt work. What would be the correct process to see what the issue is? From what I can see the safety cable has been pulled out however...
Back
Top