- Messages
- 7,081
- Reaction score
- 6,025
- Points
- 527
- Location
- Naples Florida
- Boat Make
- Yamaha
- Year
- 2005
- Boat Model
- SX
- Boat Length
- 23
I would like to see video of this process! Gotta check youtube.
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
110HP block is interchangable with the 160HP block.....
- Thread starter Ryan Vogels
- Start date
- Tagged users None
Speedling
Jetboaters Admiral
- Messages
- 5,105
- Reaction score
- 4,304
- Points
- 432
- Location
- Cedar Lake, IN
- Boat Make
- Yamaha
- Year
- 2008
- Boat Model
- SS
- Boat Length
- 21
Lol
My buddy and i did it for the exciter sleeves because we made one good set from 2 engines. In the grill to get them out it was like a timer! Set it upside down on a couple of blocks and when ya heard all three hit the grates, they're done!
Don't think we took video, but perhaps a picture. I know that grill is now work only as he has gotten a few skis in for work now.
My buddy and i did it for the exciter sleeves because we made one good set from 2 engines. In the grill to get them out it was like a timer! Set it upside down on a couple of blocks and when ya heard all three hit the grates, they're done!
Don't think we took video, but perhaps a picture. I know that grill is now work only as he has gotten a few skis in for work now.
Joe Current
Jet Boat Lover
- Messages
- 7
- Reaction score
- 1
- Points
- 72
- Boat Make
- Yamaha
- Year
- 2007
- Boat Model
- SX
- Boat Length
- Other
I wouldnt recommend that procedure for resleeving a 4 stroke block.
Speedling
Jetboaters Admiral
- Messages
- 5,105
- Reaction score
- 4,304
- Points
- 432
- Location
- Cedar Lake, IN
- Boat Make
- Yamaha
- Year
- 2008
- Boat Model
- SS
- Boat Length
- 21
Nah, but the 2 smokes have the cylinder block that is seperate so it works great!
Joe Current
Jet Boat Lover
- Messages
- 7
- Reaction score
- 1
- Points
- 72
- Boat Make
- Yamaha
- Year
- 2007
- Boat Model
- SX
- Boat Length
- Other
Yea it works great on the 2 strokes but I'd recommend a hot plate or an oven over a grill any day.
Ryan Vogels
Jet Boat Addict
- Messages
- 39
- Reaction score
- 23
- Points
- 87
- Location
- Appleton, WI
- Boat Make
- Yamaha
- Year
- 2016
- Boat Model
- AR
- Boat Length
- 24
I have done this project again. Only this time I used a vx110 block AND a vx110 head. I learned a lot more than what I already had known. The heads appear to be the same. They use the same valve, valve springs, etc. Very economical way to do this if you have the know how.
@Joe Current are you still on here?
@Joe Current are you still on here?