• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Announcing the 2024 Jetboat Pilot 10th Annual Marine Mat Group Buy for JetBoaters.net members only! This is your best time to buy Marine Mat from JetboatPilot - you won't get a better price - 30% Off! Use Coupon Code JETBOATERS.NET at checkout.

    So if you are tired of stepping on really hot snaps/carpet, or tired of that musty carpet smell - Marine Mat is the best alternative out there! Get in on this now, or pay more later!

    You only have until September 30th to get in on this.....So Hurry!

    You can dismiss this notice by clicking on the "X" in the upper right corner>>>>>>>>

190 fsh yeti conversion

Patae

Jet Boat Lover
Messages
80
Reaction score
111
Points
72
Location
Tallahassee ,fl
Boat Make
Yamaha
Year
2018
Boat Model
FSH Sport
Boat Length
19
Bought a 12"square block of 1" thick sea board Screenshot_20180916-115949.png
Also bought a pack of stainless bolts , cheaper than home Depot or Lowe's. Screenshot_20180916-120006.png
Cut seaboard into 4 pieces , seat brackets are about 14 1/2" long. Put the joint in the middle . Made a pattern from construction paper for each side and punched hole holes directly through seat brackets so they would line up . Slide them in use washers from previous bolts and tighten them.down. 1537130013118129411271.jpgyou may need to move the cooler brackets back about an 1/2" to get cooler to sit down in indentation I just haven't done that and doubt that I will. 15371301811171904900441.jpg
 
45qt. , I have just enough room for the seadek top pad . We pull it out for most of the day fishing and or relaxing. So I'm usually sitting or standing on it .
 
Unfortunately the wife bought the Yeti for me for Xmas before we bought the boat . That particular Yeti had to go on that boat. I myself like the after market brands better than yetis but I have live with the wife so the boat had to be modified .Lol.
 
Unfortunately the wife bought the Yeti for me for Xmas before we bought the boat . That particular Yeti had to go on that boat. I myself like the after market brands better than yetis but I have live with the wife so the boat had to be modified .Lol.

LOL! Attaboy! Good man. Besides, it looks great.
 
Can't go wrong with the Yeti. Certainly better than the aftermarket. If do the same thing :thumbsup:
 
Plus I need the extra 5qts for the PB&J's....
 
Fits under. The 40 qt does. Get that one. Do not have to raise the seat. This is the one in the picture up in the thread.E25C44BC-BBCA-4BB0-94E0-C7C559358400.jpeg
 

Attachments

  • Giantex 40 Cooler.jpg
    Giantex 40 Cooler.jpg
    197.5 KB · Views: 11
Back
Top