• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

2008 SX230 Cavitation

Scott Purucker

Scott Purucker

Well-Known Member
Messages
10
Reaction score
0
Points
50
Location
SW Michigan
Boat Make
Yamaha
Year
2008
Boat Model
SX
Boat Length
23
According to the tech I talked to, 0.015 on one side means it’s 0.030 and it’s too much. What do you think?
 
Scottintexas

Scottintexas

Jetboaters Admiral
Staff member
Messages
5,811
Reaction score
6,405
Points
482
Location
Corinth, TX (DFW)
Boat Make
Yamaha
Year
2007
Boat Model
AR
Boat Length
23
Scott Purucker said:
According to the tech I talked to, 0.015 on one side means it’s 0.030 and it’s too much. What do you think?
Click to expand...
so the shop sold you bad impeller/wear ring that's out of spec, thank you Mr. Tech for admitting that, please send me some new stuff,

This is from the manual, I read and have always understood it to be at the single point of measure, not cumulative,

we had a thread about measuring impeller pitch ( it may have been by swatski when he did his multiple brand testing for surfing)
I still think it would be a good idea to know exactly what pitch you have to help rule out some of the variables you have


1687963948549.png
 
You must log in or register to reply here.
Top