rkluck
Jetboaters Captain
- Messages
- 1,157
- Reaction score
- 483
- Points
- 222
- Location
- Powder Springs, GA
- Boat Make
- Yamaha
- Year
- 2010
- Boat Model
- Limited S
- Boat Length
- 24
I have a 2010 MFI trailer works great except in reverse it just started to not release the brakes.
I have tested and know that when in reverse the electrical connection from the truck to the trailer is activated. This weekend I will be at the trailer and will check to insure there is not a broken wire in or bad connection in the trailer.
My guess is that the wiring will be OK. Does anyone know if the reverse lockout is just a solenoid that I can check (using an ohm meter (basically a coil I think)) and if these are available without having to purchase the whole front actuator?
I have tested and know that when in reverse the electrical connection from the truck to the trailer is activated. This weekend I will be at the trailer and will check to insure there is not a broken wire in or bad connection in the trailer.
My guess is that the wiring will be OK. Does anyone know if the reverse lockout is just a solenoid that I can check (using an ohm meter (basically a coil I think)) and if these are available without having to purchase the whole front actuator?