• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

2013 212X Spider Crack Question

SCP1

Jetboaters Admiral
Messages
1,351
Reaction score
937
Points
262
Location
DeForest, WI
Boat Make
Yamaha
Year
2021
Boat Model
212S
Boat Length
21
The 212x I was looking at has a big spider crack between the window and the rub rail (on the white). Is this common (the crack is about 3 feet and right now there are 3 other cracks off the main one? What caused this, the tower? I'm assuming it was not the cleat as it is not by the cleat. How much to have this fixed as it would drive me nuts (also what are the odds that this could be repaired and look like new)?
image.jpeg
 
Last edited by a moderator:
The gel coat is a lot less flexable than the fiberglass it protects. So if you flex the fiberglass beyond a certain point you will get these cracks in the gel coat without any significant damage to the fiberglass My guess is someone was holding on to the windshield while under way (never a good idea under any circumstances) and flexed the fiberglass. You can get a product that will quickly fix those cracks. I will post later once I find the product name
 
I'm not so sure a do it yourself product will fix a big area like that. But it can be fixed better than new. Cost wise, depends on who bids on it, where your located, and how much demand for that type work there is. But a good glass shop can fix it easy. Might be $500+/-. It is really a $150 job. But no one will gather all needed to do even a small job and do it for that. He can do a large area as easy as a small area, so the cost isn't really in materials, but setup and time to finish. Anyway, it is just cosmetic more than likely.
 
I had those on both sides....warranty took care of the issue.
 
Thanks for your replies, I think I am holding to my original plan. Waiting for the 2017's!
 
Last edited:
Back
Top