• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

2014 212x/212ss Bow roller???.??

I was trying to research this on here because I just had the same issue with the Stoltz setup that fits these 210/212s.

I somehow got on the trailer about an inch crooked and the stoltz rollers compressed enough to allow the metal to dig into the hull. I think I may try and buy the bigger end bells for a little more protection.
 

Attachments

  • E9597FC2-761B-4B61-AA09-58E06B94C4EB.jpeg
    E9597FC2-761B-4B61-AA09-58E06B94C4EB.jpeg
    1.2 MB · Views: 14
  • 989076AB-B54D-4C34-A489-FE3C0441DF1C.jpeg
    989076AB-B54D-4C34-A489-FE3C0441DF1C.jpeg
    1.4 MB · Views: 14
I was trying to research this on here because I just had the same issue with the Stoltz setup that fits these 210/212s.

I somehow got on the trailer about an inch crooked and the stoltz rollers compressed enough to allow the metal to dig into the hull. I think I may try and buy the bigger end bells for a little more protection.


that sucks!. I would try to go 1 size bigger on the mid section and like two sizes bigger on the bell ends. The ramps we frequent are steep as hell, and unless I power load the hell out of it I can never come close to the roller. i know When I change mine out again “ Likely to be a while” that’s what I will do. A little bit bigger on all three pieces I think would give a better contact area and piece of mind that in no way are you getting into the metal.
 
Back
Top