FLJetBoater
Jet Boat Junkie
- Messages
- 741
- Reaction score
- 283
- Points
- 137
- Boat Make
- Yamaha
- Year
- 2020
- Boat Model
- 242 Limited S E-Series
- Boat Length
- 24
Does anyone have details or pictures of their 2014 242 (or similar hull) on a continental trailer? The previous owner of mine I believe had the wrong bunk brackets on (5x8). I just swapped them out for 5x10 and it’s sitting much better at the back, well clear of the fenders.
however, (and it was like this before I changed the bunks) the bow does not sit on the lower roller under the hitch and it feels like there is a ton of pressure on the top roller. The roller is pretty squished. I feel like I’m lifting the boat up when I crank the hitch. I wonder if it’s too high?
there are no target (front) bunks. Does yours have them?
apparently there is a “config” document available from continental for this boat on the trailer. does anyone know anyone who would have access to it?
however, (and it was like this before I changed the bunks) the bow does not sit on the lower roller under the hitch and it feels like there is a ton of pressure on the top roller. The roller is pretty squished. I feel like I’m lifting the boat up when I crank the hitch. I wonder if it’s too high?
there are no target (front) bunks. Does yours have them?
apparently there is a “config” document available from continental for this boat on the trailer. does anyone know anyone who would have access to it?
Last edited:
