• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

2017 Yamaha 212 Limited Display Unit

Rfraz1

Member
Messages
1
Reaction score
0
Points
20
Boat Make
Yamaha
Year
2018
Boat Model
Limited S
Boat Length
21
I have a 2017 212 Limited and the touchscreen display unit does not really work anymore. I was looking at replacing it with OEM would this be plug and play or would a dealership have to sync the software etc?
[td]

Display Unit

F3R-U8K12-00-00

[/td]
 
I have a 2017 212 Limited and the touchscreen display unit does not really work anymore. I was looking at replacing it with OEM would this be plug and play or would a dealership have to sync the software etc?
[td]

Display Unit

F3R-U8K12-00-00

[/td]
Should be plug in play. You might need to enter the model code in the diag screen if certain functions dont show up
 
Back
Top