• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

2018 190 FSH Redesign

This too shall pass. We took the FSH out Clearwater Pass in 2-3ft seas Wednesday. Didn't catch any keepers but had a delicious Cuban sandwich. Then rode up to Anclote Key just for the ride. Good to see you back CT.
 
I just went all over the videos and pics again and I can't find anything like that either. Could it be a connector in the engine compartment? Perhaps these two, kind of look like hook-ups and they are symmetrical?

View attachment 63367


And what are these ports for? The thick plottens!!!


View attachment 63368 View attachment 63369
Flush ports are in the clean out hatch. The large ports beneath the hatch are for a hose, due to the hatch heaving to be shut to run the engines.
 
Back
Top