Welcome to Jetboaters.net!

We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

2020 Chaparral 2430 Vortex Turbo Issue

Thread starter Dollarbill1967
Start date Friday at 2:56 PM
Tags

turbo

Dollarbill1967

Member

Friday at 2:56 PM

I have 2020 Chaparral Vortex, 2430. Almost made it through the season without any issues just want to take the boat for final ride this season in New Jersey and the right engine would not start. Well, I’m familiar with the relay issue and I had a couple in stock so I replaced one of the ignition relays and the motor started right up. Took the boat out for a ride and after, a proper warm-up I push the throttle all the way forward and the RPMs stopped at 6000 instead of the normal 7900 to 8000. I did not hear the familiar sounds of turbo functioning so I knew it was the turbo immediately. Does anybody have any easy troubleshooting tips for what the most likely problem would be with the turbo thank you.

You must log in or register to reply here.