• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

303 Fabric Guard and white residue

flyingnugget

Jetboaters Commander
Messages
452
Reaction score
418
Points
192
Location
Newnan, GA
Boat Make
Yamaha
Year
2024
Boat Model
255XD
Boat Length
25
So I had a buddy send this to me and I know it will help some of y'all out too.

I'm a huge 303 product fan. Love their stuff . I always used the Fabric Guard on my old boat for the mooring cover and Bimini. So, When I got the new boat this year, the first thing I did was treat both of the new Mooring and Bimini covers with a nice helping of Fabric Guard. After it dried there was a white chalky looking residue on them. I thought it was maybe from using too much product (first time in 10yrs) but, it comes out that there was formula issue from 303 causing the white chalky residue.

You can contact 303 for a refund if this has happened to you. I will be calling them later today.

Hope this helps. On a similar issue, anyone have a suggestion for a detergent that we can use to clean the cover with that wont damage it?

Thanks y'all58938354-4F03-4C54-A7A2-0C6F86F5B01B.jpeg
 
Back
Top